Skip to main content

Blackbird Registration

Step One (Connect to the gateway's WiFi access point)​

After properly mounting your gateway, take your smartphone and open the "WiFi Connections". If the gateway is powered on, you will see a WiFi access point named "Chirp-XXXXXX" (XXXXXX represents gateway-specific numbers). Connect your phone to this access point. Password is the same as the access point name Chirp-XXXXXX.

It is strongly recommended to stay close to the gateway (around 5 meters) during the registration process to ensure a stable connection.

One

Step Two (Open the gateway's access point in your browser)​

Once successfully connected to the gateway's WiFi access point, open your internet browser and type the following IP address in the address bar: 192.168.230.1

Step Three (Create a password for your gateway)​

You will be prompted to create a password for your gateway. Enter password twice and click "Set password".

Three

Step Four (Select the gateway's primary connection type to the internet)​

On the next screen, select the gateway's primary connection type to the internet. For these instructions, we will choose Ethernet. Click "Next".

Four

Step Five (Configure the gateway's connection to the internet)​

If you want to assign a static IP address or customize DNS fields, you can do so on this screen. If you are unsure about these settings, keep default and simply click "Save".

Five

Step Six (Confirm the internet connection)​

The gateway will confirm the internet connection. Click "Next".

Six1

Six2

Step Seven (Select country and region)​

On the next screen, select your country and LoRaWAN region. Click "Confirm" and then click "Save".

Seven1

Seven2

Seven3

Step Eight (Register the gateway)​

This is the final step of registration through the gateway's access point. On this screen, you have the option to change the password for the gateway's access point "Chirp-XXXXXX" to enhance security. We recommend you change the password by following link "Go to Wi-Fi settings". Set new password and click "Save".

Eight1

Eight2

After changing the password open the Dashboard and click "Register". You will be redirected to the login screen of the Chirp's Dashboard.

Eight3

Step Nine (Log into your Chirp's Dashboard account)​​

Log into your Chirp's Dashboard account, you already have it (this is where you redeemed your NFT).

Nine

Step Ten (Name your gateway)​

After signing in, you will be prompted to name your gateway for your convenience. This allows you to differentiate between multiple gateway, such as Berlin Gateway, Washington Gateway, etc.

Ten

Step Eleven (Enrollment Fee)​

Once your Chirp gateway is installed, the next step is to pay the enrollment fee of 4000 data credits ($40). This fee covers your data credits. These data credits will be transferred to your account and can be used for connectivity services. Please, see here for additional info.

Eleven1

Note: Payment can be made through PayPal at Billing -> Data credits page.

Eleven2

Step Twelve (Connect Sui wallet)​

Next you need to connect Sui wallet for rewards (i.e. Sui or Suiet) to Chirp platform. Click "Connect wallet".

Twelve1

Select your wallet.

Twelve2

Click "Next".

Twelve3

Note: You can also connect reward wallet at Billing -> Rewards wallet page.

Twelve4

Step Thirteen (Submit pictures of the gateway and its installation)​

Upload the pictures of the gateway and its installation that you took during the final step of gateway installation.

Thirteen1

Press "Next". You will receive a message confirming the successful submission of the photos.

Thirteen2

Step Fourteen (Set antennas settings and approximate direction of antenna)​

Choose antenna`s height counting from the ground level and click "Next".

Fourteen1

Choose antenna's type and approximate direction on map and click "Next".

Fourteen2

Note: Please be honest in selecting the antenna height and orientation as it does not impact your rewards, but it is crucial for accurate calculation of the network coverage map.

Now, wait for the approval of your gateway registration. Click "Continue".

Fourteen3

If you have questions regarding verification process please refer to requirements page.

Contact us via help@chirpwireless.io for further assistance.

You will also receive an email associated with your account.

You can log into your dashboard to monitor the status of your installation approval.